Airport Fence

Material: Low carbon steel rod Q195 or Q235
Feature: Beautiful appearance, installation is easy
Application: Walkway security fencing, Airport security fencing

Airport Fence is also known as "Y-Shape security fence". It is strengthened by the v-shaped support arm and welded mesh, security fittings and hot-dip galvanized concertina razor wire to form a high level of strength and security. Airport Fence is widely used in airports, military bases and other high security sites.

On top of the airport fence is concertina razor wire which acts as a good enhanced safety barrier. By galvanization, polyester powder coating, airport fence has very good resistance to aging. It has sun-resistant, corrosion-resistant characteristics. Airport Fence is good looking in appearance. It can have various colors and it's not only a fencing application but a perimeter decoration. Due to its high safety, good anti-climbing ability, mesh connections using special SBS tight fastener, it effectively prevent cases of human destructive disassembly. The four horizontal bend makes the mesh strength increased significantly.

Airport security fence with curves/Garden Fence made into panel as main part of welded wire fence for security and segregate of road, yards, sport fields, airports and public district fencing by fix them with anti-thief post, round post or square post. It is a commercial choice and welcome by people all over the world.

Materials of security fence:High tensile steel deformed bars, low carbon steel rod Q195 or Q235, low carbon steel wire, stainless steel wire , galvanized iron wire ,etc.

Surface treatment:
   •  Fully Hot Dipped Galvanized
   •  267 grams/sqm Hot Dipped Galvanized
   •  Polyester Coating

   •  Bridge anti-climb guarding & guard safety screening;
   •  Sub-station security fencing;
   •  Psychiatric hospital security fencing;
   •  Factory machine guards;
   •  Walkway security fencing;
   •  Airport security fencing;
   •  358 wire mesh fence gates;
   •  Shipping port security fencing;
   •  Electrical sub-station fencing;
   •  Water treatment works;
   •  Gas security window grilles;
   •  Balustrades security fence as well as some other commercial/industrial security fence uses

It usually uses steel mesh, shaped tube, fence edge connection, welded pipe, connected accessories and hot-dipped tube pillars fixed; It has a beautiful appearance, and its life cycle is long which can reduce maintenance costs, installation is easy, structure is strong, and surface contacting is little, which ensure the long-term clean. 

Packing & Shipping

1>Panel Packing:
It has soft sponge at the bottom of the pallet to avoid the bottom fence panel to be damaged by metal pallet.
It has 4 metal corners to keep the pallet be more strong.
It has metal plate under the plastic bandage to avoid the bandage to pressure the fence panel.
It has wood plate on the top of pallet to keep the above pallet to de destroyed by the pallet. 

2>Post Packing:
The post is covered with plastic cap then packed with plastic film. Clips packed by set. 

Plastic bags + steel boxes

Air port security fence specifications

Panel size:
Wire diameter: 3.0 mm ~ 6.0mm;
Opening (mm):50X100,50X120 ,50X150,50X200,75X150,75X200
Height: 0.8 ~ 2.0m; less than 4.0m is available
Width:2m ~ 3.0m

Fence Post:
Top V - shaped post: 70x100x1.2mm,50x70x1.2mm,60x90x1.2mm
Square post:50 mmx50mm, 60mmx60mm, 40mmx60mm,
Round Post: 48mm OD, 60mm OD.
Peach Post: 50 mmx70 mm, 70mmx100mm
Post thickness:1.2 mm to 2.5mm
Post Height: 0.8 m ~ 3.5m
Post Base: with or without the base flange are both available.
Post Fittings: post clips with Bolts and nuts, post rain cap, The customization is also available.